Price | RM115.00 - RM202.00 RM130.00 - RM217.00 |
Product SKU | NPBMIO-05 |
Brand | Nippon Paint |
Size (L x W x H) | 180 mm x 180 mm x 240 mm |
Availability | 484 |
Colour
|
|
Quantity |
|
- Chemical resistant
- Weather resistant
- Metallic Finish
NIPPON PAINT MICACEOUS IRON OXIDE
Micaceous Iron Oxide is an alkyd-based coating pigmented with micaceous iron oxide. It is recommended for use as protective coating on steel structures. It may be overcoated with alkydbased finish or left uncoated.
PAINT TYPE | PRODUCT TYPE | FINISHING | RECOMMENDED SUBSTRATE | PACK SIZE |
Solvent Based | Interior and Exterior | Low Gloss | Wood and Metal | 1 Litre ,5 Litre,15 Litre,20 Litre |
COMPOSITION | ||||
PIGMENT | Micaceous Iron Oxide, Aluminium And Extender | |||
BINDER | Alkyd | |||
THINNER | General Purpose Thinner | |||
TECHNICAL DATA | ||||
DRYING TIME |
Touch Dry : 1 hour Hard Dry : 16 hour Drying time above is based on temperature 28 – 32 °C, humidity 70 – 80% and 5% dilution with Nippon General Purpose Thinner. |
|||
RECOATING TIME |
Minimum 16 hours Recoating time above is based on temperature 28 – 32 °C, humidity 70 – 80% and 5% dilution with Nippon General Purpose Thinner. *Important Note: Drying Time and recoating time are strongly depending on environment ventilation, paint thickness, environment temperature, environment humidity, number of coats applied, thinner used to dilute product and recoat materials. So drying time and recoating time provided is for guide only. |
|||
DRY FILM THICKNESS | 50 - 60 m per coat (dry film thickness) | |||
NO. OF COATS | 1 - 2 coats | |||
THEORETICAL COVERAGE |
10.2 m2 per litre (for dry film thickness of 50m) 8.5 m2 per litre (for dry film thickness of 60m |
|||
PRACTICAL COVERAGE (20% LOSS FACTOR) |
8.2 m2 per litre (for dry film thickness of 50m) 6.8 m2 per litre (for dry film thickness of 60m) |
|||
VOLUME SOLID | ~ 51% by volume | |||
SHELF LIFE | Up to 24 months in tight sealed container | |||
APPLICATON METHOD | ||||
BURSH / ROLLER | If necessary, add up to 5% Nippon General Purpose thinner by volume. | |||
COMPRESSED AIR SPRAY AIRLESS SPRAY | If necessary, add up to 15% Nippon General Purpose thinner by volume. | |||
TIP SIZE | 140 – 170 kg/cm2 | |||
TIP PRESSURE | 0.015” – 0.017” | |||
SPRAY ANGLE | 60° - 70° | |||
DILUTION | Up to 5% Nippon General Purpose thinner by volume | |||
SURFACE PREPARATION | ||||
The surface must be free from millscale, rust, grease, oil and other contaminants; it must be dry at the time of application. | ||||
CLEANING | ||||
Clean up equipment with thinner immediately after use. | ||||
SAFETY PRECAUTIONS | ||||
|
||||
NOTES | ||||
* Theoretical Coverage is based on a mathematical formula
Note: This theoretical coverage rate has been calculated from the volume solids of the material and is related to the amount of coating applied onto a perfectly smooth surface without wastage. For a practical coverage rate, due allowance should be made for atmospheric conditions, surface roughness, geometry or the article being coated, the skill of applicator etc. when estimating quantities required for a particular job. The above information is given to the best of our knowledge based on laboratory tests and practical experience. However, since we cannot anticipate or control the many conditions under which our products may be used, we can only guarantee the quality of the product itself. We reserve the right to alter the given without prior notice |
1 x Nippon Paint 5L Micaceous Iron Oxide