Price | RM47.00 RM59.00 |
Product SKU | NPBOSMXX01 |
Brand | Nippon Paint |
Size (L x W x H) | 150 mm x 200 mm x 200 mm |
Availability | 1718 |
Colour
|
|
Quantity |
|
• Low odour
• Fungus resistant
• Luxurious soft matt finishing
NIPPON PAINT ODOURLITE SOFT MATT FINISH
Odourlite Soft Matt Finish is a low odour oil modified alkyd-based enamel paint for all wood and metal surfaces. It has a luxurious soft matt finishing.
PAINT TYPE | PRODUCT TYPE | FINISHING | RECOMMENDED SUBSTRATE | PACK SIZE |
---|---|---|---|---|
Solvent based | Interior & Exterior | Soft Matt | Wood and Metal | 1 / 5 Litres |
COMPOSITION | ||||
PIGMENT | Mainly Titamium Dioxide, Iron Oxide, Carbon Black, Organic Pigments and Mineral Extender | |||
BINDER | Modified long oil alkyd | |||
THINNER | Low aromatic hydrocarbon | |||
TECHNICAL DATA | ||||
DRYING TIME |
Touch Dry : 2 – 3 hours Hard Dry : 7 - 8 hours Drying time above is based on temperature 28 – 32 °C, humidity 70 – 80% and 5% dilution with Nippon General Purpose Thinner. |
|||
RECOATING TIME |
Overnight Recoating time above is based on temperature 28 – 32 °C, humidity 70 – 80% and 5% dilution with Nippon General Purpose Thinner. *Important Note: Drying Time and recoating time are strongly depending on environment ventilation, paint thickness, environment temperature, environment humidity, number of coats applied, thinner used to dilute product and recoat materials. So drying time and recoating time provided is for guide only |
|||
DRY FILM THICKNESS | 30 - 35 µm per coat (based on substrate condition) | |||
NO. OF COATS | 2 coats | |||
THEORETICAL COVERAGE |
9 – 11 m2 per litre per coat (Actual coverage is dependent on substrate condition, application method, application condition and finishing appearance) |
|||
VOLUME SOLID | ~49% | |||
SHELF LIFE | Up to 36 months in tight sealed container | |||
APPLICATON METHOD | ||||
BURSH / ROLLER | The paint is ready for use after thorough stirring. Dilute the paint with 5% - 10% of Odourlite thinner, if necessary. Recommend to use Nippon Synthetic Brush or Nippon WB 4 Inch Roller for application. | |||
CONVENTIONAL AIR SPRAY | Dilute the paint with 5% - 10% of Odourlite thinner, if necessary. | |||
RECOMMENDED COATING SYSTEM | ||||
WOOD | ||||
SEALER / PRIMER |
9000 Aluminium Wood Primer : 1 coat |
|||
UNDERCOAT | Odourlite Undercoat : 1 coat | |||
TOP COAT | Odourlite Soft Matt Finish : 2 coats | |||
METAL | ||||
SEALER / PRIMER |
Red Oxide Primer / Zinc Phosphate Primer 1 coat |
|||
UNDERCOAT | Odourlite Undercoat : 1 coat | |||
TOP COAT | Odourlite Soft Matt Finish : 2 coats | |||
ALUMINIUM/GALVANIZED IRON | ||||
ETCHING PRIMER | Etching Primer 120 / Galvaprimer : 1 coat | |||
SEALER / PRIMER |
Red Oxide Primer / Zinc Phosphate Primer : 1 coat |
|||
UNDERCOAT | Odourlite Undercoat : 1 coat | |||
TOP COAT | Odourlite Soft Matt Finish : 2 coats | |||
SURFACE PREPARATION | ||||
Wood Surface must be dry and free from dirt, grease and other contaminants. Smoothen surface with sandpaper and then clean off and dry. The scraped areas should be spot-primed using an undercoat for wood surfaces. Metal Surface must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire-brushed to remove millscales and rust. Clean off dust and dry. The scraped areas should be spot-primed using a primer for metal. |
||||
CLEANING | ||||
Clean up equipment with water immediately after use. | ||||
SAFETY PRECAUTIONS | ||||
|
||||
NOTES | ||||
* Theoretical Coverage is based on a mathematical formula
|
1 x Nippon Paint 5L Odourlite Soft Matt Finish